UAV-based rock mass characterization for geological strength index (GSI) assessment and comparison with conventional field mapping
DOI:
https://doi.org/10.3846/enviro.2026.2360Abstract
Rock mass characterization is essential for reliable Geological Strength Index (GSI) estimation, particularly in inaccessible or steep slopes where conventional field mapping is challenging. This study evaluates the feasibility of utilizing Unmanned Aerial Vehicle (UAV)-based photogrammetry for GSI assessment using the Cai et al. (2004) chart in a granitic outcrop in Machang, Kelantan, Malaysia. Quantitative parameters, including block volume (Vb) and joint roughness, were derived from 3D point clouds, while joint condition factors (Jc) were assessed through both manual and UAV approaches. Results show strong correlation between UAV and manual assessments (R² = 0.9894 for GSI). The findings demonstrate that UAV-based methods can reliably replace conventional field mapping, improving safety, efficiency, and data density for GSI assessment of Cai et al. (2004).
Keywords:
UAV, Geological Strength Index (GSI), rock mass characterizationHow to Cite
Adnan, R. A. A. R., Ismail, M. A. M., Tobe, H., Miyoshi, T., Date, K., & Yokota, Y. (2023). Preliminary assessment of joint roughness coefficient of rock slope using UAV–SfM photogrammetry technique. Journal of the Geological Society of India, 99(10), 1465–1473. https://doi.org/10.1007/s12594-023-2493-8
Arifin, M. H., Kayode, J. S., Izwan, M. K., Zaid, H. A. H., & Hussin, H. (2019). Data for the potential gold mineralization mapping with the applications of Electrical Resistivity Imaging and Induced Polarization geophysical surveys. Data in Brief, 22, 830–835. https://doi.org/10.1016/j.dib.2018.12.086
Benfield, S. L. (2023). Site characterization using drone based photogrammetry [Master’s thesis, Colorado School of Mines]. https://repository.mines.edu/bitstreams/24dbf407-9db9-43d7-b278-a3d8b75b3d82/download
Cai, M., Kaiser, P. K., Uno, H., Tasaka, Y., & Minami, M. (2004). Estimation of rock mass deformation modulus and strength of jointed hard rock masses using the GSI system. International Journal of Rock Mechanics and Mining Sciences, 41(1), 3–19. https://doi.org/10.1016/S1365-1609(03)00025-X
Cai, M., Kaiser, P. K., Tasaka, Y., & Minami, M. (2007). Determination of residual strength parameters of jointed rock masses using the GSI system. International Journal of Rock Mechanics and Mining Sciences, 44(2), 247–265. https://doi.org/10.1016/j.ijrmms.2006.07.005
Ge, Y., Chen, Q., Tang, H., Cao, B., & Hussain, W. (2023). A Semi-automatic approach to quantifying the geological strength index using terrestrial laser scanning. Rock Mechanics and Rock Engineering, 56(9), 6559–6579. https://doi.org/10.1007/s00603-023-03412-1
Ghorbani, E., Shahinfar, M., & Taheri, A. (2025). A review of the geological characterization, classification, modeling, and case studies of anisotropic rock masses. Deep Resources Engineering, 2(4), Article 100219. https://doi.org/10.1016/j.deepre.2025.100219
Farmakis, I., Marinos, V., & Vlachopoulos, N. (2019, June 23–26). Assessment of the GSI along rock slopes based on LiDAR and photogrammetry point clouds. In Proceedings of the 53rd U.S. Rock Mechanics/Geomechanics Symposium (ARMA-2019-2057). New York City, New York.
Moomivand, H., Soltanalinejad, S., & Allahverdizadeh, H. (2026). Development of a new method for evaluating the geological strength index (GSI) by applying image analysis to in-situ rock mass. Bulletin of Engineering Geology and the Environment, 85, Article 158. https://doi.org/10.1007/s10064-026-04778-6
Morelli, G. L. (2015). Variability of the GSI index estimated from different quantitative methods. Geotechnical and Geological Engineering, 33, 983–995. https://doi.org/10.1007/s10706-015-9880-x
Pozo, R. (2022a). Equivalent Geological Strength Index (GSI) approach with application to rock mass slope stability. Rudarsko-geološko-naftni zbornik, 37(4), 53–70. https://doi.org/10.17794/rgn.2022.4.5
Pozo, R. (2022b). Comparative analysis of different calculation methods of the Geological Strength Index (GSI) based on qualitative and quantitative approaches. Rudarsko-geološko-naftni zbornik, 37(3), 121–138. https://doi.org/10.17794/rgn.2022.3.10
Russo, G. (2009). A new rational method for calculating the GSI. Tunnelling and Underground Space Technology, 24(1), 103–111. https://doi.org/10.1016/j.tust.2008.03.002
Salvini, R., Vanneschi, C., Coggan, J. S., & Mastrorocco, G. (2020). Evaluation of the use of UAV photogrammetry for rock discontinuity roughness characterization. Rock Mechanics and Rock Engineering, 53, 3699–3720. https://doi.org/10.1007/s00603-020-02130-2
Saptono, S., & Rezky, D. M. (2023). Application Geological Strength Index (GSI) quantification method on the characterization of carbonate rock mass. Journal of Sustainable Mining, 22(3), Article 5. https://doi.org/10.46873/2300-3960.1387
Siddique, T. (2024). Rock mass classification in slope engineering with special emphasis on Slope mass rating: Current status and future projections. Geological Journal, 59(9), 2472–2486. https://doi.org/10.1002/gj.4933
Singh, J., Pradhan, S. P., Vishal, V., & Singh, M. (2023). Characterization of a fractured rock mass using geological strength index: A discrete fracture network approach. Transportation Geotechnics, 40, Article 100984. https://doi.org/10.1016/j.trgeo.2023.100984
Zafaty, O., Oukassou, M., Mhamdi, H. S., Tabuce, R., & Chariere, A. (2023). Integrated remote sensing data and field investigations for geological mapping and structural analysis. The case of SW Tichoukt ridge (Middle Atlas, Morocco). Journal of African Earth Sciences, 198, Article 104784. https://doi.org/10.1016/j.jafrearsci.2022.104784
Xia, K., Chen, C., Wang, T., Pang, H. & (2022). Quantification of the GSI and D values in the Hoek–Brown criterion using the rock quality designation (RQD) and discontinuity surface condition rating (SCR). Bulletin of Engineering Geology and the Environment, 81, Article 4. https://doi.org/10.1007/s10064-021-02493-y
Zamzam, S. (2023). Geological controls and prospectivity mapping for manganese ore deposits using predictive modeling comparison: An integration of outcrop and remote sensing data, Sinai microplate, Egypt. Journal of Earth Science, 34, 588–608. https://doi.org/10.1007/s12583-021-1583-z
Downloads
CrossMark check
Published
Conference Event
Section
Copyright
License
This work is licensed under a Creative Commons Attribution 4.0 International License.
Vilnius Gediminas Technical University
Nordic Geodetic Commission
International Federation of Surveyors
European Sustainable Energy Innovation Alliance
New European Bauhaus Academy
The Lithuanian Roads Association
Lithuanian Water Suppliers Association
Bentley
AB "Kauno tiltai"
UAB "Kerista"
UAB "Danfoss"
UAB "EMP recycling"
UAB "ACO Lietuva"
UAB "Arginta"
UAB "Skadec LT"
UAB "GPS partneris"
UAB "Hnit-Baltic"
AB "Eurovia Lietuva"
VšĮ "RV Agentūra"
UAB "GeoNovus"